POPU microbeauty – materiały do makijażu permanentnego Przejdź do głównej zawartości
Darmowa wysyłka przy zamówieniach powyżej 149 USD (USA, Kanada, Australia, Azja...) / 249 USD (Europa)
  • English
  • Español
  • 한국어
  • 繁體中文
  • 日本語
  • Deutsch
  • français
  • Italiano
  • svenska
  • Nederlands
  • Polski

Nowość

POPU Żel do pielęgnacji po brwiach

W przeciwieństwie do tradycyjnych saszetek do rozrywania, które są nieporęczne i brudzące, POPU brow aftercare posiada innowacyjny, jednorazowy system otwierania na zatrzask. Każda jednostka jest indywidualnie zapakowana i otwiera się jednym prostym kliknięciem — bez rozrywania, bez ściskania, bez marnowania produktu.

Kup teraz
Igły do kartridży do cieniowania POPU Omni V2 Mist – POPU MICRO BEAUTY

Nowość

POPU Ołówek do wstępnego rysunku do odrywania

Zdejmij osłonkę, nałóż natychmiast. Gładka aplikacja z wyraźnym, precyzyjnym kolorem dla łatwego podkreślenia brwi.

Kup teraz
POPU Peel off Predraw Pencil – POPU MICRO BEAUTY
01 / 01

Najlepsze kolekcje

PMU machine kit

Zestaw do maszyny PMU

Kup teraz
MINI DIVA PRO

Maszyny POPU PMU

Kup teraz
POPU PMU Cartridges

Wkłady POPU PMU

Kup teraz
SMP Cartridges Needles

Igły do wkładów SMP

Kup teraz
Vernus Microneedle Cartridges

Wkłady mikronakłuwające Vernus

Kup teraz
Permanent Makeup Practice Skin

Skóra do ćwiczeń makijażu permanentnego

Kup teraz

How to use Memory Modes on the Mini Diva Series?


Every Mini Diva — the 3.0mm, the 3.5mm, and Mini Diva Pro — comes with two memory modes that store voltage settings.The memory modes are EYEBROW and LIPS. After you select a mode and adjust the voltage, the machine will remember the voltage you set, and switching between a brow session and a lip session only requires a single tap. Memory holds voltage only. Nothing else can be record.

1.How to set up two modes

Do not save a voltage you have not tested. First work on practice skin, find the voltage that fits you well. Then save it:

That is the whole setup: two tested voltages in two modes. Stroke is not part of this — see below.

2.What the memory modes don't do

They save voltage and nothing else. Stroke is not saved: on the Pro you set it on the dial (2.5–3.0mm for brows and 3.2–3.5mm for lips is a common setup), and on the 3.0mm and 3.5mm it is fixed. Needle depth, cartridge, and hand speed are not saved either — you choose them for each client.

The memory modes keep your two most-used settings ready with one press.
popu_logo_3241d39c-4afb-4572-b5ef-51a13a694b11

POPU Tips Of The Week

2026/10/16

1. What makes a mist effect look soft rather than heavy?

A soft mist effect comes from controlled pigment distribution, not from forcing more pigment into the skin.

The needle movement, pigment flow, and saturation level all work together to determine how evenly the color is built.

With the right combination of needle, movement, and saturation, the color can be built gradually while maintaining a soft and airy appearance.

2. How Does Needle Design Affect Mist Shading?

Compared with regular 3RS cartridges, MS needles feature a “blooming” design that allows each stroke to cover a larger area, helping distribute pigment more evenly.

The broader coverage can reduce repeated passes while maintaining a natural-looking result, making the shading buildup more efficient.

Softer pigment deposition also helps build color gradually, creating smoother gradients and more natural transitions without excessive pigment concentration in specific areas.
popu_logo_3241d39c-4afb-4572-b5ef-51a13a694b11

POPU Tips Of The Week

2026/8/28


1. Can old PMU always be covered with new pigment?

Not always. Over time, old pigment can shift toward gray, blue, purple, or red tones. Applying new pigment directly over these colors may affect the final healed result and make color outcomes less predictable.
In some cases, lightening or removing old pigment first can create a cleaner and more even base for the new procedure.
A better foundation often helps achieve:
  • More even color retention
  • Cleaner shape definition
  • A more natural and refined final result
Every case is different, and whether a cover-up is suitable depends on the existing pigment color, depth, and saturation level.


2. Does more pigment mean a stronger mist effect?

Not necessarily. A softer mist effect is built through controlled pigment distribution rather than simply increasing saturation.
Applying too much pigment in one pass can make the result look heavier and reduce the softness of the transition.
Building the color gradually allows better control over saturation and creates a softer, more balanced healed result.
popu_logo_3241d39c-4afb-4572-b5ef-51a13a694b11

POPU Tips Of The Week

2026/8/28

1_a753878b-b6f5-454f-b246-7b8a0f4fa9c9

Najlepiej sprzedający się zestaw